International POS Ltd. Cameron House,

White Cross, South Road, Lancaster LA1 4XF
Telephone +44(0)1524 388811. Email: [email protected]

Bar Code Scanner Programming

 

 

Bar Code Scanner Programming

 

How do I set up a CCD Scanner to work in wand emulation mode?

 

How do I set up a Polaris 7010 Laser scanner to work with IPOS software?

 

How do I set up a CCD Scanner to work in wand emulation mode?

For CCD scanners supplied from IPL the following bar codes should be scanned from the programming manual that comes with the scanner.

PAGE 1

  1. Enter Set All Default

  2. Set All Default

PAGE 2

  1. Enter Group 0

  2. CCD Wand Emulation

  3. Exit

PAGE 24

  1. Enter Group 16

  2. Bar=Low

  3. Exit

PAGE 25

  1. Enter Group 16

  2. Slowest

  3. Exit

How do I set up a Polaris 7010 Laser scanner to work with IPOS software?

 

The IPOS software requires a keyboard wedge interface to be selected for the scanner. By default the Polaris 7010 comes programmed with the RS232 interface selected by default. In order to set the interface to Keyboard Wedge you will need to program it with the codes in the USER MANUAL (not configuration guide). Refer to Chapter 2 - Installing the Polaris P-7010.

  1. Scan Open Programming Mode (pg 19)

  2. Scan Return to Keyboard Wedge Default (pg 20)

You also need to select the User Defined Keyboard. In the CONFIGURATION GUIDE.

  1. Scan Open/Close Programming Mode (1.1 pg 12).

  2. Scan User defined keyboard (3.4.23 - pg53).

  3. Scan Open/Close Programming Mode (1.1 pg 12).